Page 78 - LIT-18626-13-42

UF4S11E0.book Page 71 Thursday, July 29, 2021 9:31 AM

Pre-operation checks

right and left fully turned positions of the jet
thrust nozzle.

EJU42181
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.

Difference between fully turned posi-
tions of jet thrust nozzle (distances A
and B):
Maximum 5 mm (0.20 in)
EJU45351
EJU43213
RiDE lever checks Yamaha Security System check
Operate the RiDE lever several times to make Make sure that the Yamaha Security System
sure that operation is smooth throughout the operates properly. (See page 30 for Yamaha
whole range. Also, make sure that the RiDE Security System setting procedures.)
EJU32666
lever returns automatically to its fully closed Engine shut-off cord (lanyard) check
position when released. Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-
yard) may not pull free when the operator
falls off, allowing the watercraft to contin-
ue to run and cause an accident. [EWJ01222]

71