Page 79 - LIT-18626-13-42

UF4S11E0.book Page 72 Thursday, July 29, 2021 9:31 AM

Pre-operation checks

1

1 Engine start/stop switch
EJU46050
Switch checks To check the operation of the switches:
ECJ01311
(1) If the lock mode is selected for the
Do not run the engine over 4000 r/min on Yamaha Security System setting, select
land. Also, do not run the engine for more the unlock mode. (See page 30 for
than 15 seconds without supplying water, Yamaha Security System setting proce-
otherwise the engine could overheat. dures.)
(2) Push the engine start/stop switch to
Check the engine start/stop switch and the make sure that the engine starts.
engine shut-off switch for proper operation.
(3) As soon as the engine starts running,
(See page 31 for information on operating
push the engine start/stop switch to
each switch.)
make sure that the engine stops immedi-
ately.
1
2 (4) Restart the engine, and then pull the en-
gine shut-off cord (lanyard) to remove
the clip from the engine shut-off switch
to make sure that the engine stops im-
mediately.
EJU40102
Storage compartment checks
Make sure that the storage compartments
3 are not damaged and that water has not col-
1 Clip lected in the compartments. (See page 56 for
2 Engine shut-off switch information on the storage compartments.)
3 Engine shut-off cord (lanyard) EJU43800
Fire extinguisher holder, cover, and band
checks
Make sure that the fire extinguisher holder,
cover, and band are not damaged and that
the fire extinguisher is securely held in place
using the band. (See page 59 for information

72