Page 49 - LIT-18626-13-43

UF4N11E0.book Page 41 Wednesday, July 21, 2021 2:21 PM

Watercraft operation

TIP
While the T.D.E. is activated, the “N” (neutral)
shift indicator will be displayed and “0” will be
displayed on the speedometer. MPH

To deactivate the T.D.E.: RPM
Perform one of the following operations. The No Wake
T.D.E. indicator disappears and the T.D.E. is
14.3V
deactivated.
 Squeeze the throttle lever. 1
 Squeeze the RiDE lever. 1 No-wake mode indicator
 Push and hold the “CRUISE/NO WAKE” To activate the no-wake mode:
switch. (1) Shift into neutral, or release the throttle
 While moving forward at a very low speed, lever and let the engine speed return to
push the lower side of the “T.D.E.” switch. idle.
 While moving in reverse at a very low
(2) Push and hold the “CRUISE/NO WAKE”
speed, push the upper side of the “T.D.E.”
switch. Once the beeper sounds three
switch.
times and the no-wake mode indicator is
TIP displayed, the no-wake mode is activat-
The T.D.E. is also deactivated when the en- ed.
gine is stopped.
EJU46420
No-wake mode
The no-wake mode is a function that main-
tains the engine speed at a fixed setting for
operating the watercraft at low speeds.
This function can be used only when the wa-
tercraft is in neutral, or when the watercraft is
shifted into forward and the engine is operat- 1
ing at idling speed.
1 “CRUISE/NO WAKE” switch
TIP
If the no-wake mode is activated when the To deactivate the no-wake mode:
watercraft is in neutral, the watercraft will au- Perform one of the following operations. The
tomatically shift into forward and the water- beeper sounds two times and the no-wake
craft will start moving at a low speed. mode indicator disappears when the no-
wake mode is deactivated.
Activating and deactivating the no-wake  Push the “CRUISE/NO WAKE” switch.
mode  Squeeze the throttle lever.
The activation of the no-wake mode can be
 Squeeze the RiDE lever.
confirmed by the no-wake mode indicator on
the multifunction information center.

41