Page 87 - LIT-18626-13-43

UF4N11E0.book Page 79 Wednesday, July 21, 2021 2:21 PM

Pre-operation checks

(See page 32 for information on operating
each switch.)
1
2

EJU46231
Switch checks 3
ECJ01311
1 Clip
2 Engine shut-off switch
Do not run the engine over 4000 r/min on 3 Engine shut-off cord (lanyard)
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
VX-C:
Check the start switch, the engine stop
switch, and the engine shut-off switch for
proper operation. (See pages 32 to 33 for in-
formation on operating each switch.)
1
1 2 3
1 Engine start/stop switch
To check the operation of the switches
(VX-C):
(1) Push the start switch to make sure that
4 the engine starts.
(2) As soon as the engine starts running,
5
push the engine stop switch to make
sure that the engine stops immediately.
1 Engine shut-off switch
(3) Restart the engine, and then pull the en-
2 Clip
3 Start switch gine shut-off cord (lanyard) to remove
4 Engine stop switch the clip from the engine shut-off switch
5 Engine shut-off cord (lanyard) to make sure that the engine stops im-
mediately.
VX / VX DELUXE / VX CRUISER / VX
LIMITED:
Check the engine start/stop switch and the
engine shut-off switch for proper operation.

79