Page 88 - LIT-18626-13-43

UF4N11E0.book Page 80 Wednesday, July 21, 2021 2:21 PM

Pre-operation checks

To check the operation of the switches
(VX / VX DELUXE / VX CRUISER / VX
LIMITED):
(1) VX DELUXE / VX CRUISER / VX
LIMITED: If the lock mode is selected for
the Yamaha Security System setting, se-
lect the unlock mode. (See page 31 for
Yamaha Security System setting proce-
dures.)
(2) Push the engine start/stop switch to
To check the fire extinguisher, see the in-
make sure that the engine starts.
structions supplied by the fire extinguisher
(3) As soon as the engine starts running,
manufacturer. Always keep the fire extin-
push the engine start/stop switch to
guisher secured in the holder with its cover in
make sure that the engine stops immedi-
place.
ately.
Always carry a fire extinguisher on board. A
(4) Restart the engine, and then pull the en-
fire extinguisher is not standard equipment
gine shut-off cord (lanyard) to remove
with this watercraft. If you do not have one,
the clip from the engine shut-off switch
contact a Yamaha dealer or a fire extinguish-
to make sure that the engine stops im-
er dealer to obtain one meeting the proper
mediately.
specifications.
EJU40102
Storage compartment checks
Make sure that the storage compartments Fire extinguisher:
Classification:
are not damaged and that water has not col-
5-B (B-1)
lected in the compartments. (See page 63 for Capacity:
information on the storage compartments.) 2 lb or more
EJU43800
Fire extinguisher holder, cover, and band EJU40122
checks Safety equipment check
Make sure that the fire extinguisher holder, Check that safety equipment meeting the ap-
cover, and band are not damaged and that plicable regulations is on board.
the fire extinguisher is securely held in place EJU32353
Hull and deck check
using the band. (See page 66 for information
Check the hull and deck for damage or other
on the fire extinguisher holder, cover, and
problem.
band.) EJU32657
EJU32535 Jet intake checks
Fire extinguisher check Make sure that the jet intake is not damaged
Check that there is a full fire extinguisher on
or clogged with weeds or debris. If the jet in-
board.
take is clogged, clean it. (See page 112 for in-
formation on the jet intake.)
80