Page 72 - LIT-18626-13-44

UF3Y15E0.book Page 66 Tuesday, July 20, 2021 10:30 AM

Operation

that the engine shut-off cord (lanyard) to avoid. A collision could result in severe
is attached correctly. If the engine injury or death. [EWJ00602]
shut-off cord (lanyard) is not attached
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00583]
2
1

EJU32874
3 Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
dental starting or unauthorized operation by
1 Clip children or others.
2 Engine shut-off switch
3 Engine shut-off cord (lanyard)
(3) With the throttle lever released, push the
start switch (green button) to start the
engine. (See page 31 for information on
operating the start switch.)

EJU44361
Operating the watercraft
EX:
When the engine is running, the watercraft
will move forward at trolling speed even if the
throttle lever is in the fully closed (idle) posi-
tion.
EJU32863
Stopping the engine
Release the throttle lever, and then push the
engine stop switch (red button) to stop the
engine. WARNING! You need throttle to
steer. Shutting the engine off can cause
you to hit an obstacle you are attempting

66