Page 95 - LIT-18626-13-92

UF3X14E0.book Page 86 Monday, July 11, 2022 11:31 AM

Operation and handling requirements

1
1

1 Dipstick 1 Engine oil filler cap
(4) Insert the dipstick back into the dipstick (7) Slowly add engine oil.
tube completely. Remove the dipstick TIP
again and make sure that the engine oil The difference between the minimum and
level is between the minimum and maxi- maximum level marks on the dipstick is equal
mum level marks. to approximately 1 L (1.06 US qt, 0.88 Imp.qt)
of engine oil.
(8) Wait approximately 5 minutes to allow
the engine oil to settle, and then check
the engine oil level again.
1
(9) Repeat steps 3–8 until the engine oil is at
2 the proper level.
(10) Securely install the engine oil filler cap by
tightening it until it stops.
(11) Securely install the seats in their original
1 Maximum level mark
positions.
2 Minimum level mark
(5) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, add en-
gine oil.
(6) Loosen the engine oil filler cap and re-
move it.

86