Page 57 - LIT-18626-13-94

UF4P13E0.book Page 50 Thursday, July 14, 2022 10:30 AM

Instrument operation

curity System setting procedures.)
EJU45993
Warning function
The multifunction information center can indi-
cate the following warnings. x1000 Low
RPM
Fuel
 Fuel level warning
 Battery voltage warning MPH
 Check engine warning
 Engine overheat warning
 Oil pressure warning 14.3V
 Other warnings (communication errors, ex-
If the fuel level warning is activated, refill the
ceeding the maintenance intervals, and so
fuel tank as soon as possible. (See page 61
on)
for information on filling the fuel tank.)
To stop the buzzer when a malfunction is ac-
Battery voltage warning
tivated, correct the cause of the problem and
If the battery voltage is less than 12 volts or
start the engine again, or push the “OK” but-
more than 18 volts when the engine is not
ton of the touchpad control.
running, the voltage display of the voltmeter
blinks.
1

RPM
x1000
MPH

1 “OK” button 10.8V
Fuel level warning
If the amount of remaining fuel is low, the low- If the battery voltage warning is activated,
est fuel level segment blinks orange, “Low have the watercraft serviced by a Yamaha
Fuel” is displayed on the right side of the fuel dealer as soon as possible.
level meter, and the buzzer sounds intermit- Check engine warning “ ”
tently. If a sensor malfunction or a short circuit is
detected, “ ” is shown in the warning bar,
and the buzzer sounds intermittently.

If the check engine warning is activated, im-
mediately reduce the engine speed, return to

50