Page 46 - LIT-18626-13-96

UF4S12E0.book Page 39 Friday, July 15, 2022 9:17 AM

Watercraft operation

Activating and deactivating the no-wake Wake –1”, “No Wake” (standard setting),
mode and “No Wake +1”.
The activation of the no-wake mode can be
confirmed by the no-wake mode indicator on
the multifunction information center.

MPH
1
RPM
No Wake +1
1 “SPEED ADJUST” switch
14.3V
To deactivate the no-wake mode:
1 2
Perform one of the following operations. The
1 No-wake mode indicator
beeper sounds two times and the no-wake
2 No-wake mode level
mode indicator disappears when the no-
To activate the no-wake mode:
wake mode is deactivated.
(1) Shift into neutral, or release the throttle  Push the “CRUISE/NO WAKE” switch.
lever and let the engine speed return to  Squeeze the throttle lever.
idle.  Squeeze the RiDE lever.
(2) Push and hold the “CRUISE/NO WAKE”
TIP
switch. Once the beeper sounds three
The no-wake mode is also deactivated when
times and the no-wake mode indicator is
the engine is stopped.
displayed, the no-wake mode is activat-
ed. EJU46340
Drive control mode
The drive control mode is a function for set-
ting the maximum watercraft speed and ac-
celeration for stable towing.
The maximum watercraft speed can be se-
lected from three settings and the accelera-
tion can be selected from two settings.
Activating the drive control mode
Activation of the drive control mode can be
1 confirmed by the drive control mode indica-
tor on the multifunction information center.
1 “CRUISE/NO WAKE” switch
When the drive control mode is activated, the
(3) Push the upper side or the lower side of
drive control mode indicator is shown in light
the “SPEED ADJUST” switch to adjust
yellow.
the engine speed to three settings: “No

39