Page 71 - LIT-18626-13-99

UF6C11E0.book Page 65 Tuesday, July 19, 2022 4:21 PM

Operation

that the engine shut-off cord (lanyard) to avoid. A collision could result in severe
is attached correctly. If the engine injury or death. [EWJ00602]
shut-off cord (lanyard) is not attached
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00583]
1
2

EJU32874
Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
3 dental starting or unauthorized operation by

1 Clip children or others.
2 Engine shut-off switch
3 Engine shut-off cord (lanyard)
(3) With the throttle lever released, push the
engine start/stop switch (red button) to
start the engine. (See page 30 for infor-
mation on operating the engine
start/stop switch.)

EJU43413
Operating the watercraft
When the throttle lever is squeezed, the “F”
(forward) shift indicator will be displayed and
the watercraft will move forward. While the
“F” (forward) shift indicator is displayed, the
watercraft will move forward at trolling speed
even if the throttle lever is in the fully closed
EJU46080 (idle) position. (See page 33 for shift system
Stopping the engine
Release the throttle lever, and then push the operation procedures.)
engine start/stop switch (red button) to stop
the engine. WARNING! You need throttle to
steer. Shutting the engine off can cause
you to hit an obstacle you are attempting

65