Page 61 - LIT-18626-14-56

UF4R13E0.book Page 55 Friday, March 31, 2023 1:54 PM

Operation

60 cm (2 ft)

(2) Attach the engine shut-off cord (lanyard) EJU45710
Stopping the engine
to your left wrist, and then attach the clip
Release the throttle lever, and then push the
to the engine shut-off switch. (See page
engine stop/“L-MODE” switch (red button) to
27 for information on operating the en-
stop the engine. WARNING! You need
gine shut-off switch.) WARNING! Check
throttle to steer. Shutting the engine off
that the engine shut-off cord (lanyard)
can cause you to hit an obstacle you are
is attached correctly. If the engine
attempting to avoid. A collision could re-
shut-off cord (lanyard) is not attached
sult in severe injury or death. [EWJ00602]
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00583]
1
2

EJU32874
3 Leaving the watercraft
If leaving the watercraft, remove the clip from
the engine shut-off switch to prevent acci-
1 Clip
dental starting or unauthorized operation by
2 Engine shut-off switch
children or others.
3 Engine shut-off cord (lanyard)
(3) With the throttle lever released, push the
start switch (green button) to start the
engine. (See page 27 for information on
operating the start switch.)

55