Page 42 - LIT-18626-15-25

UF4N14E0.book Page 31 Friday, May 24, 2024 8:56 AM

Control function operation

EJU31027
Watercraft control functions TIP
The multifunction information center is turned
EJU45092
Yamaha Security System on, even if the engine start/stop switch is also
(VX DELUXE / VX CRUISER / VX pushed briefly.
LIMITED)
(2) Select the lock or unlock mode indicator
The Yamaha Security System functions to
on the multifunction information center.
help prevent unauthorized use or theft of the
watercraft. The lock and unlock modes of the (3) Input each digit of the 4-digit PIN, and
security system can be selected using the then push the “OK” button of the touch-
engine lock screen of the multifunction infor- pad control at the “Lock” or “UnLock”
mation center. The engine cannot be started button.
if the lock mode of the security system is se-
lected. The engine can only be started if the
unlock mode is selected.
TIP
The Yamaha Security System setting can
only be selected while the engine is stopped.
EJU47420
Yamaha Security System setting
The Yamaha Security System setting can be
confirmed by the lock or unlock mode indica-
tor on the multifunction information center. TIP
The default setting for the PIN is “1234”. The
PIN can also be changed. (See page 57 for in-
1 formation on changing the PIN.)
(4) The beeper sounds once when the lock
mode of the Yamaha Security System is
2 selected, and two times when the unlock
mode is selected.
EJU46113
Engine start/stop switch “ / ”
ECJ01311
1 Lock mode indicator
2 Unlock mode indicator Do not run the engine over 4000 r/min on
To select the lock or unlock mode of the land. Also, do not run the engine for more
Yamaha Security System: than 15 seconds without supplying water,
otherwise the engine could overheat.
(1) Stop the engine.
The engine start/stop switch (red button)
starts the engine when the switch is pushed
while the engine is stopped, and stops the

31