Page 43 - LIT-18626-15-25

UF4N14E0.book Page 32 Friday, May 24, 2024 8:56 AM

Control function operation

engine when the switch is pushed while the
engine is running.
1
Release the engine start/stop switch as soon
as the engine starts to run. If the engine does
not start in 5 seconds, release the engine
start/stop switch, wait 15 seconds, and then
try again.
2
3
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
1 vent accidental starting or unauthorized op-
eration by children or others.
1 Engine start/stop switch
The engine will not start under any of the fol-
lowing conditions:
 VX DELUXE / VX CRUISER / VX LIMITED:
Lock mode of the Yamaha Security System
has been selected. (See page 31 for
Yamaha Security System setting proce-
dures.)
 Clip is removed from the engine shut-off
switch.
 Throttle lever is squeezed. TIP
 Throttle lever is malfunctioning. It is recommended that a spare engine shut-
 RiDE lever is squeezed. off cord (lanyard) be stored in the glove com-
 RiDE lever is malfunctioning. partment to allow a passenger to restart the
EJU31165 watercraft if the operator falls from the water-
Engine shut-off switch “ ”
The engine shut-off switch automatically craft.
stops the engine when the clip, on the end of EJU31212
the engine shut-off cord (lanyard), is removed Throttle lever
from the switch, such as if the operator falls The throttle lever increases the engine speed
off the watercraft. when the lever is squeezed.
Insert the clip under the engine shut-off
switch before starting the engine.

32