Page 52 - LIT-18626-15-25
P. 52

UF4N14E0.book  Page 41  Friday, May 24, 2024  8:56 AM



                        Watercraft operation


                        TIP                                   The buzzer sounds two times and the drive
                        The no-wake mode is also deactivated when  control mode is cancelled.
                        the engine is stopped.                To operate the watercraft using the drive
                                                              control mode:
                        EJU47471
                        Drive control mode                    (1) Release the throttle lever and let the en-
                        The drive control mode is a function for set-  gine speed return to idle.
                        ting the maximum watercraft speed.    (2) Turn the drive control mode on.
                        The maximum watercraft speed can be se-  (3) Squeeze the throttle lever.
                        lected from two settings.
                                                              Selecting the drive control mode settings
                        Activating the drive control mode     The drive control mode setting for the maxi-
                        Activation of the drive control mode can be  mum watercraft speed is saved. In addition,
                        confirmed by the drive control mode indica-  the activation and settings of the drive control
                        tor on  the multifunction information center.  mode can be locked to prevent others from
                        When the drive control mode is activated, the  changing them.
                        drive control mode indicator is shown in light  When the drive control mode is locked, a PIN
                        yellow.                               must be entered to operate the drive control
                                      1                       mode screen.
                                                              To select the maximum watercraft speed
                                                              setting:
                                                              Select the maximum watercraft  speed limit
                                                              (“Speed”), and set the desired speed.
                                                                               1



                          1 Drive control mode indicator
                        To activate the drive control mode:
                        (1) Select the drive control mode indicator.
                        (2) Select the “      ” toggle switch,
                            and then push the “OK” button on the
                            touchpad control.                  1 Maximum watercraft speed setting
                        The buzzer sounds three times and the drive  Locking the drive control mode
                        control mode is activated.            The drive control mode can be locked.
                        To cancel the drive control mode:     To lock the drive control mode:
                        (1) Select the drive control mode indicator.  (1) Select the drive control mode indicator.
                        (2) Select the “      ” toggle switch,  (2) Select the “   ” toggle switch,
                            and then push the “OK” button on the  and then push the “OK” button on the
                            touchpad control.                    touchpad control.




                        41
   47   48   49   50   51   52   53   54   55   56   57