Page 99 - LIT-18626-15-25

UF4N14E0.book Page 88 Friday, May 24, 2024 8:56 AM

Operation

(3) Attach the engine shut-off cord (lanyard) EJU46080
Stopping the engine
to your left wrist, and then attach the clip
Release the throttle lever, and then push the
to the engine shut-off switch. (See page
engine start/stop switch (red button) to stop
32 for information on operating the en-
the engine. WARNING! You need throttle to
gine shut-off switch.) WARNING! Check
steer. Shutting the engine off can cause
that the engine shut-off cord (lanyard)
you to hit an obstacle you are attempting
is attached correctly. If the engine
to avoid. A collision could result in severe
shut-off cord (lanyard) is not attached
injury or death. [EWJ00602]
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00583]
1
2

EJU32874
Leaving the watercraft
If leaving the watercraft, remove the clip from
3
the engine shut-off switch to prevent acci-
1 Clip
dental starting or unauthorized operation by
2 Engine shut-off switch
children or others.
3 Engine shut-off cord (lanyard)
(4) With the throttle lever released, push the
engine start/stop switch (red button) to
start the engine. (See page 31 for infor-
mation on operating the engine
start/stop switch.)

88