Page 67 - LIT-18626-15-27
P. 67

UF5S10E0.book  Page 57  Monday, September 23, 2024  2:13 PM



                                                                 Instrument operation
















                        If the fuel level warning is activated, refill the  If the check engine warning is activated, im-
                        fuel tank as soon as possible. (See page 66  mediately reduce the engine speed, return to
                        for information on filling the fuel tank.)  shore, and have a Yamaha dealer check the
                        Battery voltage warning               engine.
                        If the battery voltage is less than 12 volts or  TIP
                        more than 18 volts when the engine is  not  Push the “OK” button of the touchpad control
                        running, the voltage display of the voltmeter  to display a description of the warning in the
                        blinks.                               center display.

                                                              Engine overheat warning “  ”
                                                              If  the   engine  temperature  rises
                                                              significantly, “  ” and “  ” are shown in the
                                                              warning bar, and the buzzer sounds continu-
                                       RPM x1000
                                                              ously.
                                                MPH

                          10.8v

                        If the battery voltage warning is activated,
                        have the watercraft serviced by  a  Yamaha
                        dealer as soon as possible.
                        Check engine warning “  ”
                        If a sensor malfunction  or a short circuit is
                        detected, “  ” is shown in the warning bar,
                        and the buzzer sounds intermittently.  If the engine overheat warning is activated,
                                                              immediately reduce the engine speed, return
                                                              to shore, and then make sure that water is
                                                              being discharged from the port (left) cooling
                                                              water pilot outlet while the engine is running.
                                                              If there is no discharge of water, stop the en-
                                                              gine, and then check the jet intake for clog-



                                                                                               57
   62   63   64   65   66   67   68   69   70   71   72