Page 38 - LIT-18626-12-56

Operation and handling requirements

Yamalube the best choice for your Yamaha EJU41492
Filling the fuel tank
engine.
To fill the fuel tank:
(1) Before refueling, stop the engine. Do not
stand or sit on the watercraft. Never refu-
el while smoking, or while in the vicinity
of sparks, open flames, or other sources
of ignition.
(2) Place the watercraft in a well-ventilated
EJU31903 area and in a horizontal position.
Mixing fuel and oil (3) Remove the hood, and then check the
ECJ00332
NOTICE fuel level. (See page 26 for hood removal
and installation procedures.)
Make sure that the gasoline and oil are
(4) Loosen the fuel filler cap and remove it.
thoroughly mixed in the correct ratio, oth-
erwise severe engine damage could re-
sult.
To mix gasoline and engine oil:
(1) Pour 2-stroke engine oil into a clean con-
tainer, and then add gasoline.
Fuel-to-oil ratios (gasoline to oil)
Break-in period (first two tankfuls):
25:1
After break-in: 1
50 : 1 1 Fuel filler cap
(5) Slowly add fuel to the fuel tank.
(2) To mix them thoroughly, shake the con-
tainer from side to side. Fuel tank capacity:
Total:
18 L (4.8 US gal, 4.0 Imp.gal)
Reserve:
5.5 L (1.5 US gal, 1.2 Imp.gal)

(6) Stop filling when the fuel level just reach-
es the bottom of the filler tube. Do not fill
up the filler tube. Because fuel expands
when it heats up, heat from the engine or
the sun can cause fuel to spill out of the
fuel tank. Do not leave the watercraft
1 2-stroke engine oil with a full tank in direct sunlight.
2 Gasoline
(7) Wipe up any spilled fuel immediately with
a dry cloth.

31