Page 37 - LIT-18626-13-44

UF3Y15E0.book Page 31 Tuesday, July 20, 2021 10:30 AM

Control function operation

EJU31027
Watercraft control functions
EJU31154
Engine stop switch “ ”
The engine stop switch (red button) stops the
engine when the switch is pushed.

EJU44350
Start switch “ ”
ECJ01311
1
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
1 Engine stop switch
than 15 seconds without supplying water,
EJU31164
Engine shut-off switch “ ” otherwise the engine could overheat.
The engine shut-off switch automatically
The start switch (green button) starts the en-
stops the engine when the clip, on the end of
gine when the switch is pushed.
the engine shut-off cord (lanyard), is removed
Release the start switch as soon as the en-
from the switch, such as if the operator falls
gine starts to run. If the engine does not start
off the watercraft.
in 5 seconds, release the start switch, wait 15
Insert the clip under the engine shut-off
seconds, and then try again. NOTICE: Never
switch before starting the engine.
push the start switch while the engine is
1 running. Do not operate the start switch
for more than 5 seconds, otherwise the
2 battery will be discharged and the engine
will not start. Also, the starter motor could
be damaged. [ECJ01041]
1
3

1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
vent accidental starting or unauthorized op-
1 Start switch
eration by children or others.

31