Page 105 - LIT-18626-13-92

UF3X14E0.book Page 96 Monday, July 11, 2022 11:31 AM

Pre-operation checks

1

1 Engine start/stop switch
EJU40102
Storage compartment checks
To check the operation of the switches:
Make sure that the storage compartments
(1) If the lock mode is selected for the
are not damaged and that water has not col-
Yamaha Security System setting, select
lected in the compartments. (See page 78 for
the unlock mode. (See page 30 for
information on the storage compartments.)
Yamaha Security System setting proce- EJU41082
dures.) Fire extinguisher holder, cover, and band
(2) Push the engine start/stop switch to checks
Make sure that the fire extinguisher holder,
make sure that the engine starts.
cover, and band are not damaged and that
(3) As soon as the engine starts running,
the cover is securely held in place using the
push the engine start/stop switch to
band. (See page 81 for information on the fire
make sure that the engine stops immedi-
extinguisher holder, cover, and band.)
ately.
EJU32535
(4) Restart the engine, and then pull the en- Fire extinguisher check
gine shut-off cord (lanyard) to remove Check that there is a full fire extinguisher on
the clip from the engine shut-off switch board.
to make sure that the engine stops im-
mediately.
EJU47011
Electric trim system check
Turn on the multifunction information center,
and then operate the “TRIM/T.D.E.” switch.
Check that the jet thrust nozzle moves up and
down properly and that the trim setting indi-
cator change according to the operation of
the switch. (See page 46 for information on
turning on the multifunction information cen-
To check the fire extinguisher, see the in-
ter without starting the engine and page 37
structions supplied by the fire extinguisher
for information on the electric trim system.)
manufacturer. Always keep the fire extin-
guisher secured in the holder with its cover in
place.

96