Page 107 - LIT-18626-13-92

UF3X14E0.book Page 98 Monday, July 11, 2022 11:31 AM

Pre-operation checks

formation on proper operation of the multi-
function information center.)
EJU43394
Shift system check
Operate the throttle lever and RiDE lever, and
check that the watercraft moves or does not
move according to the displayed shift indica-
tor. (See page 35 for shift system operation
procedures.) WARNING! To avoid colli-
sions, operate at safe speeds and keep a
safe distance away from people, objects,
EJU40147
Post-launch checks and other watercraft. [EWJ01860]
Perform the post-launch checks in the pre-
operation checklist while the watercraft is in
the water and the engine is running.
To perform the post-launch checks:
(1) Launch the watercraft. (See page 100 for
information on launching the watercraft.) MPH
2 RPM
(2) Perform the checks and make sure that x1000
there are no malfunctioning items or oth- 3
10 :00 AM
er problems. 12.7 V 4
EJU41811 1
Cooling water pilot outlet check
1 Shift indicator
Make sure that water is discharged from the
2 “F” (Forward position)
port (left) cooling water pilot outlet while the
3 “N” (Neutral position)
engine is running. (See page 33 for informa-
4 “R” (Reverse position)
tion on the cooling water pilot outlets.)
EJU40172
Engine idling speed check
Start the engine and warm it up. Use the ta-
chometer in the multifunction information
center to make sure that the engine idling
speed is not significantly above or below the
specified range.
Engine idling speed:
1250 ±100 r/min

EJU47001
Multifunction information center check
Make sure that the multifunction information
center operates properly. (See page 46 for in-

98