Page 49 - LIT-18626-13-94

UF4P13E0.book Page 42 Thursday, July 14, 2022 10:30 AM

Watercraft operation

EJU45921 When the drive control mode is locked, a PIN
Drive control mode
must be entered to operate the drive control
The drive control mode is a function for set-
mode screen.
ting the maximum watercraft speed and ac-
To select the maximum watercraft speed
celeration for stable towing, and to adjust the
and acceleration settings:
trim angle automatically.
The maximum watercraft speed can be se- (1) Select “Speed/Acceleration”.
lected from three settings and the accelera- (2) Select the maximum watercraft speed
tion can be selected from two settings. setting under “Speed” and the accelera-
Activating the drive control mode tion setting under “Accel.”
Activation of the drive control mode can be
1 2
confirmed by the drive control mode indica-
tor on the multifunction information center. Drive Control
Speed Accel.
When the drive control mode is activated, the
High
drive control mode indicator is shown in light Nomal
yellow. Middle
Slow
Low
1
Save
3
Drive Control
1 Maximum watercraft speed setting
Speed/Acceleration 2 Acceleration setting
3 “Save”
Auto Trim
(3) Select the “Save” button to complete the
Lock settings and return to the previous dis-
play.
1 Drive control mode indicator Activating the auto trim
The auto trim is activated, the trim angle is
To operate the watercraft using the drive
automatically adjusted.
control mode:
When the auto trim is activated, the drive
(1) Release the throttle lever and let the en-
control mode indicator and “Auto Trim” are
gine speed return to idle.
shown in light yellow.
(2) Activate each drive control mode.
(3) Squeeze the throttle lever.
Selecting the drive control mode settings
The drive control mode settings for the max-
imum watercraft speed and acceleration are
saved. In addition, the activation and settings
of the drive control mode can be locked to
prevent others from changing them.

42