Page 50 - LIT-18626-13-94

UF4P13E0.book Page 43 Thursday, July 14, 2022 10:30 AM

Watercraft operation

To unlock the drive control mode:
(1) Select the drive control mode indicator.
Drive Control
(2) Input each digit of the 4-digit PIN, and
Speed/Acceleration then push the “OK” button of the touch-
pad control.
Auto Trim
(3) Select “Lock”.
EJU45930
Lock Cruise assist
The cruise assist is a function for maintaining
1 a desired engine speed within a fixed range
1 “Auto Trim” while operating the watercraft. Once the
The trim icon of the home screen is also cruise assist is activated, the set engine
shown in light yellow. speed can be increased or decreased. How-
ever, the adjustment is limited to a maximum
1
of five increments above or below the initial
cruise assist setting.
TIP
RPM The cruise assist can only be set between en-
x1000
gine speeds of approximately 3000 r/min and
approximately 7000 r/min.
MPH
Activating and deactivating the cruise as-
sist
14.3V
Activation of the cruise assist can be con-
1 Trim icon
firmed by the cruise assist indicator on the
Locking the drive control mode
multifunction information center.
The drive control mode can be locked.
To lock the drive control mode:
(1) Select “Lock”.
(2) Input each digit of the 4-digit PIN, and x1000
RPM
then push the “OK” button of the touch-
pad control. MPH
Cruise Assist +4

Enter PIN 14.3V
* * * * 1 2
1 2 3 1 Cruise assist indicator
4 5 6 2 Cruise assist level
7 8 9 To activate the cruise assist:
0 (1) Operate the throttle lever until the de-
sired engine speed is reached.

43