Page 88 - LIT-18626-14-62

UF4N13E0.book Page 80 Tuesday, June 6, 2023 9:38 AM

Pre-operation checks

the clip from the engine shut-off switch
to make sure that the engine stops im-
mediately.
EJU40102
Storage compartment checks
Make sure that the storage compartments
are not damaged and that water has not col-
lected in the compartments. (See page 63 for
information on the storage compartments.)
EJU43800
1
Fire extinguisher holder, cover, and band
1 Engine start/stop switch checks
To check the operation of the switches Make sure that the fire extinguisher holder,
cover, and band are not damaged and that
(VX-C):
the fire extinguisher is securely held in place
(1) Push the start switch to make sure that
using the band. (See page 66 for information
the engine starts.
on the fire extinguisher holder, cover, and
(2) As soon as the engine starts running,
band.)
push the engine stop switch to make EJU32535
sure that the engine stops immediately. Fire extinguisher check
Check that there is a full fire extinguisher on
(3) Restart the engine, and then pull the en-
board.
gine shut-off cord (lanyard) to remove
the clip from the engine shut-off switch
to make sure that the engine stops im-
mediately.
To check the operation of the switches
(VX / VX DELUXE / VX CRUISER / VX
LIMITED):
(1) VX DELUXE / VX CRUISER / VX
LIMITED: If the lock mode is selected for
the Yamaha Security System setting, se-
lect the unlock mode. (See page 31 for
To check the fire extinguisher, see the in-
Yamaha Security System setting proce-
structions supplied by the fire extinguisher
dures.)
manufacturer. Always keep the fire extin-
(2) Push the engine start/stop switch to
guisher secured in the holder with its cover in
make sure that the engine starts.
place.
(3) As soon as the engine starts running, Always carry a fire extinguisher on board. A
push the engine start/stop switch to fire extinguisher is not standard equipment
make sure that the engine stops immedi- with this watercraft. If you do not have one,
ately. contact a Yamaha dealer or a fire extinguish-
(4) Restart the engine, and then pull the en- er dealer to obtain one meeting the proper
gine shut-off cord (lanyard) to remove specifications.

80