Page 90 - LIT-18626-14-62

UF4N13E0.book Page 82 Tuesday, June 6, 2023 9:38 AM

Pre-operation checks

EJU40147 safe distance away from people, objects,
Post-launch checks
and other watercraft. [EWJ01860]
Perform the post-launch checks in the pre-
VX
operation checklist while the watercraft is in 1
the water and the engine is running. 2
To perform the post-launch checks:
(1) Launch the watercraft. (See page 84 for 3
information on launching the watercraft.)
4
(2) Perform the checks and make sure that
there are no malfunctioning items or oth-
er problems.
EJU40553
Cooling water pilot outlet check
Make sure that water is discharged from the 1 Shift indicator
cooling water pilot outlet while the engine is 2 “F” (Forward position)
running. (See page 34 for information on the 3 “N” (Neutral position)
cooling water pilot outlet.) 4 “R” (Reverse position)
VX DELUXE / VX CRUISER / VX LIMITED

MPH

RPM
2
3
14.3V
4
EJU46240 1
Multifunction information center check 1 Shift indicator
Make sure that the multifunction information 2 “F” (Forward position)
center operates properly. (See page 45, 50 3 “N” (Neutral position)
for information on proper operation of the 4 “R” (Reverse position)
multifunction information center.) EJU40172
EJU43394 Engine idling speed check
Shift system check (VX / VX DELUXE / Start the engine and warm it up. Use the ta-
VX CRUISER / VX LIMITED) chometer in the multifunction information
Operate the throttle lever and RiDE lever, and
center to make sure that the engine idling
check that the watercraft moves or does not
speed is not significantly above or below the
move according to the displayed shift indica-
specified range.
tor. (See page 36 for shift system operation
procedures.) WARNING! To avoid colli- Engine idling speed:
sions, operate at safe speeds and keep a 1500 ±100 r/min

82