Page 93 - LIT-18626-14-62

UF4N13E0.book Page 85 Tuesday, June 6, 2023 9:38 AM

Operation

START

(3) Attach the engine shut-off cord (lanyard) VX / VX DELUXE / VX CRUISER / VX
to your left wrist, and then attach the clip LIMITED: With the throttle lever released,
to the engine shut-off switch. (See page push the engine start/stop switch (red
32 for information on operating the en- button) to start the engine. (See page 32
gine shut-off switch.) WARNING! Check for information on operating the engine
that the engine shut-off cord (lanyard) start/stop switch.)
is attached correctly. If the engine
shut-off cord (lanyard) is not attached
correctly, it may not pull free when the
operator falls off, allowing the water-
craft to continue to run and cause an
accident. [EWJ00583]

1
2

EJU46260
Stopping the engine
Release the throttle lever, and then push the
engine stop switch (red button) (VX-C) or the
engine start/stop switch (red button) (VX /
VX DELUXE / VX CRUISER / VX LIMITED) to
3
1 Clip stop the engine. WARNING! You need
2 Engine shut-off switch throttle to steer. Shutting the engine off
3 Engine shut-off cord (lanyard) can cause you to hit an obstacle you are
(4) VX-C: With the throttle lever released, attempting to avoid. A collision could re-
push the start switch (green button) to sult in severe injury or death. [EWJ00602]
start the engine. (See page 33 for infor-
mation on operating the start switch.)

85