Page 56 - LIT-18626-15-20

UF3X16E0.book Page 44 Wednesday, July 17, 2024 9:11 AM

Watercraft operation

speed can be increased or decreased. How-
ever, the adjustment is limited to a maximum
of five increments above or below the initial
cruise assist setting.
TIP
The cruise assist can only be set between en-
gine speeds of approximately 3000 r/min and
approximately 7000 r/min.
1
Activating and deactivating the cruise as-
sist 1 “CRUISE/NO WAKE” switch
Activation of the cruise assist can be con-
(3) When the cruise assist is activated, slow-
firmed by the cruise assist indicator on the
ly squeeze the throttle lever to keep it
multifunction information center.
squeezed further than the position at
which the cruise assist was set.
F
TIP
Check the multifunction information center to
make sure that the cruise assist is activated
MPH before squeezing the throttle lever to the full
RPM
CRUISE ASSIST +1 E throttle position. If the cruise assist is not ac-
tivated, the engine will respond normally to
OFF PM
12.7 v
the throttle operation.
1 2 (4) Once the cruise assist is activated, push
1 Cruise assist indicator
the upper side of the “SPEED ADJUST”
2 Cruise assist level
switch to increase the set engine speed
To activate the cruise assist: or the lower side of the “SPEED AD-
(1) Operate the throttle lever until the de- JUST” switch to decrease the set engine
sired engine speed is reached. speed. The engine speed can be
(2) When the engine speed reaches the de- changed in the range of the cruise assist
sired cruise assist setting, push the levels –5 to +5.
“CRUISE/NO WAKE” switch. Once the
beeper sounds three times and the
cruise assist indicator is displayed, the
cruise assist is activated.

44