Page 30 - LIT-18626-12-56

Control function operation

will not start. Also, the starter motor could zle is changed, and the direction of the water-
be damaged. [ECJ01041] craft is changed accordingly.

1

START

1 Start switch 1 Handlebar
2 Jet thrust nozzle
The engine will not start when the clip is re-
moved from the engine shut-off switch. Since the strength of the jet thrust determines
EJU31212 the speed and degree of a turn, throttle must
Throttle lever
always be applied when attempting a turn,
The throttle lever increases the engine speed
except at trolling speed.
when the lever is squeezed.
The angle of the jet thrust nozzle can be ad-
justed to suit operator preference. (See page
61 for information on adjusting the jet thrust
nozzle angle.)
EJU31273
Steering pole
The steering pole can be moved up or down
to change the height of the handlebars.

1 Throttle lever
The throttle lever returns automatically to its
fully closed (idle) position when released.
EJU35933
Steering system
By turning the handlebars in the direction you
wish to travel, the angle of the jet thrust noz-

23