Page 50 - LIT-18626-15-26

UF5R10E0.book Page 41 Friday, September 27, 2024 5:44 PM

Watercraft operation

EJU47690 To operate the watercraft using the drive
Drive control mode
control mode:
The drive control mode is a function for set-
ting the maximum watercraft speed. (1) Release the throttle lever and let the en-
The maximum watercraft speed can be se- gine speed return to idle.
lected from two settings. (2) Turn the drive control mode on.
Activating the drive control mode (3) Squeeze the throttle lever.
Activation of the drive control mode can be Selecting the drive control mode settings
confirmed by the drive control mode indica- The drive control mode setting for the maxi-
tor on the multifunction information center. mum watercraft speed is saved. In addition,
When the drive control mode is activated, the the activation and settings of the drive control
drive control mode indicator is shown in light mode can be locked to prevent others from
green. changing them.
When the drive control mode is locked, a PIN
1
must be entered to operate the drive control
mode screen.
Drive Control OFF ON To select the maximum watercraft speed
Speed Low setting:
Select the maximum watercraft speed limit
(“Speed”), and set the desired speed.
1

1 Drive control mode indicator
Drive Control OFF ON
To activate the drive control mode:
Speed Low
(1) Select the drive control mode indicator.
(2) Select the “ ” toggle switch,
and then push the “OK” button on the
touchpad control.
The buzzer sounds three times and the drive
control mode is activated. 1 Maximum watercraft speed setting
To cancel the drive control mode: Locking the drive control mode
(1) Select the drive control mode indicator. The drive control mode can be locked.
(2) Select the “ ” toggle switch, To lock the drive control mode:
and then push the “OK” button on the (1) Select the drive control mode indicator.
touchpad control. (2) Select the “ ” toggle switch,
The buzzer sounds two times and the drive and then push the “OK” button on the
control mode is cancelled. touchpad control.
(3) Enter the 4-digit PIN code, and
select “ ”.

41