Page 54 - LIT-18626-15-26

UF5R10E0.book Page 45 Friday, September 27, 2024 5:44 PM

Instrument operation

Push the “OK” button of the touchpad control
1
when the warning symbol is displayed to
show the warning description, error code,
and other information in the center display.
(See page 49 for information about the warn-
RPM x1000
ing descriptions.)
MPH
1 2
14.3v
2
1 Screen tab bar
RPM x1000
2 Center display
MPH

14.3v
3 4 5
1 Trim setting indicator
2 Fuel level meter
3 Voltmeter
1 4 Tachometer
5 Shift indicator
Trim setting indicator
1 Warning bar The position of this indicator indicates the
trim setting of the jet thrust nozzle. (See page
Screen tab bar
37 for information on the trim setting.)
When each symbol is selected, the watercraft
information, function settings, and other in- Voltmeter
The voltmeter shows the battery voltage.
formation are shown in the center display.
When the battery voltage is normal, the volt-
(See page 46 for information on each screen.)
meter displays approximately 14 volts.
Center display
If the battery voltage has dropped or risen
The center display shows the watercraft in-
significantly, the battery voltage warning will
formation, function settings, and other infor-
activate and the voltage display will blink.
mation according to the symbol on the
(See page 50 for information on the battery
screen tab bar that is selected.
voltage warning.)
Warning bar
The warning bar is shown when an error or Tachometer
The tachometer shows the engine speed us-
malfunction is detected.
ing the numbers ×1000 RPM (r/min) and the
number of display segments.

45