Page 48 - LIT-18626-15-27

UF5S10E0.book Page 38 Monday, September 23, 2024 2:13 PM

Watercraft operation

JETBLASTER DLX When the watercraft is shifted into forward,
1 the jet thrust nozzle will automatically
change to the selected trim setting.
 While the watercraft is in neutral, the
“TRIM/T.D.E.” switch controls the forward
and reverse operation of the T.D.E. (thrust
direction enhancer). (See page 40 for infor-
mation on the T.D.E.)
 The watercraft performance characteristics
according to the trim angle change de-
pending on the operating conditions.
1 “N” (Neutral position)
JETBLASTER LTD Confirming the trim setting
The trim setting can be confirmed by the trim
setting indicator on the multifunction infor-
mation center.
1
RPM x1000
MPH

14.3v
RPM x1000
1
1 “N” (Neutral position) MPH
TIP
14.3v
If the RiDE lever is squeezed continuously,
1 Trim setting indicator
the reverse gate will move to the reverse po-
To change the trim setting:
sition.
(1) Shift into forward.
EJU47860
Electric trim system (JETBLASTER (2) Push the upper side of the “TRIM/T.D.E.”
LTD) switch to increase the trim setting and
The electric trim system is a function for raise the bow, or push the lower side of
changing the vertical angle of the jet thrust the “TRIM/T.D.E.” switch to decrease the
nozzle to change the trim angle and perfor- trim setting and lower the bow. The trim
mance characteristics of the watercraft. angle can be adjusted in the range of the
This function can be used only for forward trim settings –2 to +2.
operation of the watercraft.
TIP
 When the watercraft is moving in reverse or
is in neutral, the jet thrust nozzle will auto-
matically change to the neutral trim setting.

38