Page 53 - LIT-18626-15-27

UF5S10E0.book Page 43 Monday, September 23, 2024 2:13 PM

Watercraft operation

Drive Control OFF ON
Speed Low

Auto Trim OFF ON

1
1 “Auto Trim”
To unlock the drive control mode:
The trim icon of the home screen is also (1) Select the drive control mode indicator.
shown in light green.
(2) Select the “ ” toggle switch,
1 and then push the “OK” button on the
touchpad control.
(3) Enter the 4-digit PIN code, and
select “ ”.
Auto EJU46390
Cruise assist
RPM x1000
The cruise assist is a function for maintaining
MPH a desired engine speed within a fixed range
while operating the watercraft. Once the
14.3v cruise assist is activated, the set engine
1 Trim icon speed can be increased or decreased. How-
Locking the drive control mode ever, the adjustment is limited to a maximum
The drive control mode can be locked. of five increments above or below the initial
To lock the drive control mode: cruise assist setting.
(1) Select the drive control mode indicator. TIP
(2) Select the “ ” toggle switch, The cruise assist can only be set between en-
and then push the “OK” button on the gine speeds of approximately 4000 r/min and
touchpad control. approximately 7000 r/min.
(3) Enter the 4-digit PIN code, and
Activating and deactivating the cruise as-
select “ ”.
sist
Activation of the cruise assist can be con-
firmed by the cruise assist indicator on the
multifunction information center.

43