Page 61 - LIT-18626-15-27

UF5S10E0.book Page 51 Monday, September 23, 2024 2:13 PM

Instrument operation

EJU45943
Multifunction information
center (JETBLASTER LTD) 1
The multifunction information center displays 2 3
various watercraft information.
The multifunction information center can turn
the various functions on or off or change set-
tings by using the d-pad of the touchpad
control.
In addition, the language and display units
shown can be changed. (See page 54 for in- 1 D-pad
formation on changing the language and dis- 2 “BACK” button
play units.) 3 “OK” button
Turning on the multifunction information D-pad
center Operate the d-pad to switch or select
When the engine start/stop switch is pushed, screens for each item.
the multifunction information center turns on. If the right side of the d-pad is pushed when
After the logo display appears for a few sec- the home screen is displayed, the multifunc-
onds, the home screen is displayed. tion information center switches in the follow-
TIP ing order.
The multifunction information center is turned Home screen → Information screen → Drive
on, even if the engine start/stop switch is also control screen → Setting screen → Engine
pushed briefly. lock screen
“BACK” button
Turning off the multifunction information Push this button to go back to the previous
center
screen.
If the multifunction information center does
Push and hold the “BACK” button to display
not receive any operation input within 25 sec-
the home screen.
onds after the engine stops or if 3 minutes
“OK” button
have elapsed after the engine stops, the cen-
Push this button to select the currently high-
ter turns off.
lighted item.
TIP
TIP
The multifunction information center turns off
Push this button to stop the buzzer when a
3 minutes after the engine stops even if there
warning is activated.
is operation input.
EJU45960
EJU47920 Display
Operation buttons
The display is configured as shown below.
This model is equipped with a touchpad con-
trol to operate the multifunction information
center.

51