Page 57 - LIT-18626-15-27

UF5S10E0.book Page 47 Monday, September 23, 2024 2:13 PM

Instrument operation

To switch the speedometer display
1
units:
Start the engine, stop the engine, and then
remove and insert the clip 3 times before the
multifunction information center turns off.
The speedometer display units change.
To switch the speedometer display units
again, repeat this procedure.

2
1 Tachometer
TIP
While the engine is stopped, the battery volt-
1 age and the total engine hours are displayed
alternately.
EJU46200
Shift indicator (JETBLASTER DLX)
This indicator shows the reverse gate shift
1 Clip
positions: “F” (forward), “N” (neutral), and “R”
2 Engine shut-off switch
(reverse). (See page 35 for shifting proce-
dures.)
1
2

3
4

1
1 Speedometer
EJU44650 1 Shift indicator
Tachometer 2 “F” (Forward position)
The tachometer shows the engine speed. 3 “N” (Neutral position)
4 “R” (Reverse position)
EJU44701
Hour meter and voltmeter
The hour meter and voltmeter are displayed
in the tachometer portion of the information
display while the engine is stopped.
The hour meter and voltmeter are displayed
alternately at 3-second intervals.

47