Page 56 - LIT-18626-15-27

UF5S10E0.book Page 46 Monday, September 23, 2024 2:13 PM

Instrument operation

EJU44572
Multifunction information 1 2 3 4 5 6
center (JETBLASTER /
JETBLASTER DLX)
The multifunction information center displays
various watercraft information.
1 2

8 7
1 Fuel level meter
2 Shift indicator (JETBLASTER DLX)
3 Engine overheat warning indicator
4 Check engine warning indicator
5 Tachometer / hour meter / voltmeter
6 Oil pressure warning indicator
7 Fuel level warning indicator
1 Information display
8 Speedometer
2 “WARNING” indicator light
EJU47410
Multifunction information center initial op- Speedometer
eration The speedometer shows the watercraft
When the multifunction information center is speed.
activated, all of the display segments come
on. After 2 seconds, the warning indicators in
the information display go off, and then the
center starts to operate normally.
Multifunction information center standby
state
If the multifunction information center does
not receive any operation input within 30 sec-
onds after the engine stops, the center will
turn off and enter a standby state. When the 1
engine is started again, the displays return to 1 Speedometer
their state before the center turned off, and By switching the display units, the speed can
then the center starts to operate normally. be shown in kilometers per hour “km/h” or
EJU35028 miles per hour “MPH”.
Information display
The information display shows watercraft op- TIP
erating conditions. “MPH” is selected as the display unit at the
Yamaha factory.

46