Page 65 - LIT-18626-12-56

Care and storage

(2) Clean the watercraft. (See page 55 for in- z Throttle cable (throttle lever end)
formation on cleaning the watercraft.) Squeeze the throttle lever and remove the
Wax the hull with a non-abrasive wax seal. Spray Yamaha Lube-Zall into the out-
such as Yamalube Professional Polish. er cable. Refit the seal securely.
EJU40785
Lubrication
Use a Yamaha Power Cable Luber and spray
Yamaha Lube-Zall between the inner and
outer cables to lubricate the cables and
purge out any dirt and moisture.
To keep moving parts sliding or rotating
smoothly, lubricate them with water-resistant
grease.

Recommended water-resistant grease:
YAMALUBE MARINE GREASE 1 Seal
z Steering cable ball joint (handlebar end)
z Throttle cable (carburetor end) and choke
and steering cable inner wire (handlebar
cable (carburetor end)
end)
To access the steering cable ball joint (han-
dlebar end) and steering cable inner wire
(handlebar end), remove the steering pole
cover. (See step 1 in “Adjusting the jet
thrust nozzle angle” on page 61 for infor-
mation on removing the steering pole cov-
er.)

58