Page 48 - LIT-18626-13-92

UF3X14E0.book Page 39 Monday, July 11, 2022 11:31 AM

Watercraft operation

EJU40003 engine speed will increase. The engine
Watercraft operation modes
speed can be adjusted to two levels: +1
and +2.
EJU45892
Reverse assist
The reverse assist is a function for temporar- 1
ily increasing the engine speed when moving
in reverse, such as to enter the water
smoothly when launching the watercraft from
a trailer.
This function operates after the engine is
started and only if the watercraft is not shifted
into forward.
TIP
1 RiDE lever
Once the watercraft is shifted into forward af-
ter the engine is started, the reverse assist
cannot be operated.

Activating and deactivating the reverse
assist
The activation of the reverse assist can be
confirmed by the reverse assist indicator on
the multifunction information center.
1

1 “SPEED ADJUST” switch
To deactivate the reverse assist:
Perform one of the following operations. The
MPH
RPM beeper sounds two times and the reverse as-
x1000
Reverse Assist +2 sist indicator disappears when the reverse
10 :00 AM
12.7 V assist is deactivated.
 Relax your grip on the RiDE lever.
1 2
1 Reverse assist indicator  Push the lower side of the “SPEED AD-
2 Reverse assist level JUST” switch when the reverse assist level
is set to +1.
To activate the reverse assist:
 Squeeze the throttle lever.
(1) Start the engine. EJU45900
(2) Squeeze the RiDE lever to the fully open T.D.E. (thrust directional enhancer)
position, and then push the upper side of The T.D.E. is a function for slightly lifting or
the “SPEED ADJUST” switch. Once the lowering the reverse gate from the neutral po-
beeper sounds three times and the re- sition to operate the watercraft at very low
verse assist indicator is displayed, the speeds when the engine is running at idling
speed.

39