Page 50 - LIT-18626-13-92

UF3X14E0.book Page 41 Monday, July 11, 2022 11:31 AM

Watercraft operation

gine speed each above and below the initial
engine speed.
This function can be used only when the wa-
tercraft is in neutral, or when the watercraft is
shifted into forward and the engine is operat-
ing at idling speed.
TIP
If the no-wake mode is activated when the
watercraft is in neutral, the watercraft will au- 1
tomatically shift into forward and the water-
1 “CRUISE/NO WAKE” switch
craft will start moving at a low speed.
(3) Push the upper side or the lower side of
Activating and deactivating the no-wake the “SPEED ADJUST” switch to adjust
mode
the engine speed to three settings: “No
The activation of the no-wake mode can be
Wake –1”, “No Wake” (standard setting),
confirmed by the no-wake mode indicator on
and “No Wake +1”.
the multifunction information center.

MPH
RPM
x1000
No Wake +1
10 :00 AM
12.7 V 1
1 2 1 “SPEED ADJUST” switch
1 No-wake mode indicator
2 No-wake mode level To deactivate the no-wake mode:
Perform one of the following operations. The
To activate the no-wake mode:
beeper sounds two times and the no-wake
(1) Shift into neutral, or release the throttle
mode indicator disappears when the no-
lever and let the engine speed return to
wake mode is deactivated.
idle.
 Push the “CRUISE/NO WAKE” switch.
(2) Push and hold the “CRUISE/NO WAKE”
 Squeeze the throttle lever.
switch. Once the beeper sounds three
 Squeeze the RiDE lever.
times and the no-wake mode indicator is
TIP
displayed, the no-wake mode is activat-
The no-wake mode is also deactivated when
ed.
the engine is stopped.

41