Page 51 - LIT-18626-13-92

UF3X14E0.book Page 42 Monday, July 11, 2022 11:31 AM

Watercraft operation

EJU46982 When the lock is set, the drive control set-
Drive control mode
tings cannot be changed. Release the lock to
The drive control mode is a function for set-
change the settings.
ting the maximum watercraft speed and ac-
To select the maximum watercraft speed
celeration for stable towing, and to adjust the
and acceleration settings:
trim angle automatically.
(1) Select “ ” for the maximum watercraft
TIP
speed.
The watercraft speed setting is a target value.
The actual watercraft speed may vary de-
pending on the operating conditions. Drive Control Lock
Activating the drive control mode 10 SLOW OFF
Activation of the drive control mode can be MPH Acceleration
confirmed by the drive control mode indica-
tor on the multifunction information center. Auto Trim Comfort
When the drive control mode is activated, the
drive control mode indicator is shown in light
1
yellow.
1 Maximum watercraft speed
1
(2) Set the desired maximum watercraft
speed, and select “ ”.

Drive Control Lock Drive Control

10 SLOW OFF
MPH Acceleration Speed 10 MPH
C
Auto Trim Comfort
Cancel Save
1 Drive control mode indicator
To operate the watercraft using the drive
1
control mode:
1 “Save”
(1) Release the throttle lever and let the en-
gine speed return to idle. (3) Select “ ”, and set the de-
(2) Activate each drive control mode. sired acceleration.
(3) Squeeze the throttle lever.
Selecting the drive control mode settings
The drive control mode settings for the max-
imum watercraft speed and acceleration are
saved. In addition, the activation and settings
of the drive control mode can be locked to
prevent others from changing them.

42